Programmable Stainless steel keypad with proximity 1000 user

The DC2882B is a self-contained three relay outputs, vandal resistant and weatherproof keypad. It combines the functions of digital keypad and proximity EM card reader in one unit.

It is also a card reader providing of 26 bits Wiegand data output from reading of an EM Card and 34 bits data output from the entry of an PIN/code.

It is an ideal keypad mainly for Door Strike and Alarm Arm-disarm control. It is also a programmable industrial timer (with the timing of 1 second to over 24 hours) for Automatic Operator systems.

• Indoor or outdoor installation
• Stand Alone or Inter-lock system built-in with all the required control logics
• Controls Going in with PIN and/or Card; and Going out with programmable egress button
• Built-in Tamper Switch
• Heavy duty 1.5mm stainless steel faceplate
• Die-casting metal back-lit keyboard with dual brightness levels
• Vandal resistant and weatherproof (IP-66)
• Data I/O port for Up-grading the system to Split-decoded operation with the optional Controller with optional RF Remotwe Control
• 26 bit standard Wiegand data output from reading of EM cards
• 34 bit Wiegand data output on PIN / code entry
• Three outputs controlled by independent groups of codes / PINs / Cards
• Programmable Timers for Door Strike, Alarm Arm-disarm Control or Industrial Automatic Operators

• Operating Voltage : 12V-24V DC, Auto adjusting
• Operating Current : 75mA (quiescent) to 145mA (three relays active)
• Operation Temperature : -20 C to + 70 C
• Environmental Humidity : 5-95% relative humidity non-condensing
• Working Environment & Ingress Protection : All weather, IP-66
• Number of Users:
• Output 1 : 1,000 (PINs and/or Cards) + 50 Duress Codes
• Output 2 : 100 (PINs and/or Cards) + 10 Duress Codes
• Output 3 : 100 (PINs and/or Cards) + 10 Duress Codes
• Proximity Card : Standard EM Card or Keyfob, 125Khz
• Number of Visitor Codes : 50, programmable for one time or with the time limit
• Timings for Code Entry and Card Reading:
• 10 seconds waiting for next digit entry
• 30 seconds waiting for code entry after card reading
• The Timers:
• Three 1:99,999 Seconds (Over 24 Hours possible) Independent Programmable Timers for O/P 1, 2 & 3
• Egress Button:
• Programmable for Instant, Delay with Warning and/or Alarm, Momentary or Holding Contact for the Exit Delay
• Input Sensing Terminals : a) Door position, b) Egress, c) O/P 1 inhibit
• Output Control Terminals : Transistor Open Collector 24VDC/100mA sink Max for the following
outputs. a) Duress, b) Alarm, c) Key Active, d) Output 3 (Door Bell version only), e) Inter-lock
• Output Contact Ratings:
• Output Relay 1 : N.C. & N.O. dry contacts, 5A/24VDC Max.
• Output Relay 2 : N.C. & N.O. dry contacts, 1A/24VDC Max.
• Output Relay 3 : N.C. & N.O. dry contacts, 1A/24VDC Max. (N.O. contact only for Door Bell version)
• Tamper Switch : N.C. dry contact, 50mA/24VDC Max.
• Dimensions : 156(H) X 103(W) X 50/70(D)mm
• Weight : 1.03Kg net
• Housing : Anodized steel, powder paint coating outer box & plastic inner box
• Faceplate Material : 1.5mm stainless steel